本公司專業銷售原裝進口意大利瑪泰滑片式空氣壓縮機
起源
在1919年,**次世界大戰結束后,數以萬計的意大利人開始重建他們的生活。與此同時,Enes Mattei—一名年輕的工程部隊軍官,必須做出抉擇:是在工程部隊接受一份穩定的工作,還是嘗試追求他的個人夢想。雖然意識到可利用的財政資源有限,年輕的MATTEI**生仍然憑借他從工程部隊獲得的寶貴經驗,沿?*諭丫玫拇匆抵?開始了壓縮空氣**域的探索。而在那時,壓縮機行業還沒有得到充分發展。
在意大利市場的發展和成功
十五年前,瑪泰空氣壓縮機成為了一個意大利市場上建設完備的實體。在1934年,公司制造出了**臺柴油驅動的可移動式空氣壓縮機。1938年,ENEA MATTEI**生在蒙扎收購了一家鑄造廠。由于市場前景看好,他開始在MILAN的VIAFELIRE建造一家新的工廠。然而由于二戰的爆發,生意被迫停頓。直到戰后重建開始,公司才得以重新運作。從1946年到1952年間,MATTEI**生著力對公司進行擴張和革新。
從戰后至今
1960年瑪泰成為了一家股份公司,并在米蘭附近的vimodrone開始興建一個新廠。得力于公司的CEO CONTALDI**生的貢獻,工廠在1966年正式投產。在1977年Ing.Enea Mattei Spa接管了Officine Meccaniche Ing.Contaldi,--發電機組行業的市場**軍企業。4年后在貝加莫附近的zingonia成立了一個新的制造中心。從1985年至1988年,美國、英國和法國的分廠相繼投產,德國分廠也于2000年落成。
今天,瑪泰在意大利市場處于**導地位并開始了**化運作。在全世界瑪泰已有100個分支機構,50%的產品用于出口。公司的成就已經為質量管理體系全面認可。在1994年,公司通過ISO UNI EN 9001認證。
The origins
In 1919, when the First World War ended, thousands of Italians had to reorganise their lives from the beginning.
In the same period, Enea Mattei, a young officer in the Army Engineering Corps, had to decide whether to accept a secure job in the Engineering Corps or try to pursue his individual aspirations.
Though aware of the limited financial resources he had at his disposal, the young Mattei started off on the compressed air industry, following his marked disposition for entrepreneurship and exploiting the experience he had gained in the Engineering Corps.
Moreover, at those times, the compressed air industry had not developed yet.
Development and success in the Italian market
Fifteen years later, Mattei air compressors became a well-established reality in the Italian market and in 1934 the firm manufactured the first portable compressor with diesel engine.
In 1938 Mr Enea Mattei took over a cast iron foundry in Monza, and thanks to the good prospects in the market, he started building a new plant in Milan, in via Feltre.
Nevertheless, when the Second World War broke out, the business experienced a sudden rest. As reconstruction began, however, the activity started again and between 1946 and 1952 Mr Mattei committed himself to enlarge and renovate his company.
From the post war up to the present
In 1960 Mattei became a Joint Stock Company and a new plant in Vimodrone, near Milan, began to be built. The factory opened in 1966, also thanks to the contribution of Mr Contaldi, the CEO. In 1977 Ing. Enea Mattei Spa took over Officine Meccaniche Ing. Contaldi, a market leader in the generating sets industry. Four years later a new production centre in Zingonia, near Bergamo, was founded and between 1985 and 1988 exclusive distributors in USA, UK and France were opened. The German exclusive distributor was inaugurated in 2000.
Today Mattei holds a leading position in the Italian market and operates worldwide with 100 distributors and exports 50% of its production.
The company's success is also confirmed by the ISO UNI EN 9001 Quality Management System obtained in 1994.
